Data Study ยท 2026 ยท 519 towns ยท 14 regions

Heat Pump Installation Cost Index UK 2026

How much does heat pump installation cost in 2026 โ€” and how much more do you pay in London versus the cheapest UK regions? This BestBuilders study compares real 2026 quote data for a standard air-source heat pump (installed) across all 14 UK regions. The headline: it costs up to 60% more in London (ยฃ4,500 more in absolute terms) than in Scotland (Highlands & North).

Real quote data, 519 UK towns
14 regions compared
Updated 2026
Free quotes โ€” no obligation

The regional gap: London pays up to 60% more for heat pump installation

A standard air-source heat pump (installed) starts at ยฃ12,000 in London versus ยฃ7,500 in Scotland (Highlands & North) โ€” a ยฃ4,500 gap. That's a +60% London premium on the same job spec, driven mainly by labour rates and, on smaller jobs, access and permit costs. The pattern is consistent with RICS BCIS and FMB benchmark data.

Heat Pump Installation cost by UK region, 2026

Typical "starting from" prices for a standard air-source heat pump (installed), ranked most to least expensive region. Range shows the typical low-to-high spread within each region.

UK region Starting from Typical range Vs cheapest
Londonยฃ12,000ยฃ12,000 โ€“ ยฃ21,000+ยฃ4,500 (+60%)
South Eastยฃ11,100ยฃ11,100 โ€“ ยฃ19,500+ยฃ3,600 (+48%)
Southern (Hampshire, Wiltshire, Dorset)ยฃ10,500ยฃ10,500 โ€“ ยฃ18,300+ยฃ3,000 (+40%)
Eastern (East Anglia)ยฃ10,200ยฃ10,200 โ€“ ยฃ17,900+ยฃ2,700 (+36%)
West Midlandsยฃ8,500ยฃ8,500 โ€“ ยฃ14,800+ยฃ1,000 (+13%)
South Westยฃ8,500ยฃ8,500 โ€“ ยฃ14,800+ยฃ1,000 (+13%)
Yorkshire & Humberยฃ8,200ยฃ8,200 โ€“ ยฃ14,300+ยฃ700 (+9%)
North Westยฃ8,200ยฃ8,200 โ€“ ยฃ14,300+ยฃ700 (+9%)
East Midlandsยฃ8,200ยฃ8,200 โ€“ ยฃ14,400+ยฃ700 (+9%)
Merseyside & North Walesยฃ8,200ยฃ8,200 โ€“ ยฃ14,300+ยฃ700 (+9%)
North Eastยฃ7,800ยฃ7,800 โ€“ ยฃ13,700+ยฃ300 (+4%)
South Walesยฃ7,800ยฃ7,800 โ€“ ยฃ13,700+ยฃ300 (+4%)
Scotland (Central & South)ยฃ7,800ยฃ7,800 โ€“ ยฃ13,700+ยฃ300 (+4%)
Scotland (Highlands & North)ยฃ7,500ยฃ7,500 โ€“ ยฃ13,200baseline

Want your local figure? Try our full heat pump installation cost guide or get three free quotes below.

What sets the price for heat pump installation?

The three main options homeowners typically choose from โ€” and how they change the total:

  • Air-source heat pump. The most common home install โ€” an outdoor unit paired with a new hot-water cylinder and controls. From ยฃ8,000โ€“ยฃ14,000 installed after the ยฃ7,500 Boiler Upgrade Scheme (BUS) grant, by an MCS-certified installer.
  • Ground-source heat pump. A borehole or slinky-loop ground array feeding an indoor heat-pump unit. Higher upfront cost but excellent efficiency and running cost. ยฃ14,000โ€“ยฃ25,000 installed after BUS grant.
  • Hybrid heat pump + boiler. A heat pump paired with a smaller retained gas boiler for peak-demand back-up. Ideal for larger properties or where full electrification isn't yet viable. ยฃ10,000โ€“ยฃ18,000 installed.

Heat-pump installation in London and the South East runs 10-20% above the UK average, mainly driven by installer availability. The Boiler Upgrade Scheme (BUS) grant of ยฃ7,500 applies to eligible ASHP and GSHP installs.

Why does heat pump installation cost more in London?

The +60% London premium on a standard air-source heat pump (installed) tracks the same four factors seen across BestBuilders' full 2026 dataset, matching the pattern in RICS BCIS and FMB benchmark data:

  • Labour rates. Skilled-trade day rates in London and the South East run 25โ€“40% above the national average, the single biggest factor on a labour-heavy job.
  • Demand and backlogs. High demand and long waiting lists let installers in the South East price higher; quieter regional markets are more competitive.
  • Access and logistics. Restricted parking, skip and scaffold permits, congestion charges and tight rear access add cost in dense urban areas.
  • Property type. London's older housing stock often needs more preparation or bespoke solutions than newer regional housing, which pushes labour hours up.

The takeaway for homeowners: the regional figure is a starting point, not a quote. The spread within a region โ€” between the cheapest and most expensive installer โ€” is often as wide as the gap between regions, which is why comparing three quotes matters more than any headline average.

Key findings, 2026 โ€” Heat Pump Installation

  • London is the most expensive UK region in 2026 for heat pump installation, starting at ยฃ12,000 for a standard air-source heat pump (installed).
  • The cheapest regions start from ยฃ7,500: Scotland (Highlands & North).
  • That's a ยฃ4,500 cash gap on the same job spec โ€” a +60% London premium.
  • Values are typical "starting from" prices from BestBuilders' 2026 quote dataset across 519 UK towns in 14 regions.
  • Cross-checked against RICS BCIS building-cost data and FMB member surveys โ€” the regional pattern is consistent with both benchmarks.

Citing this study

You are welcome to cite the BestBuilders 2026 Heat Pump Installation Cost Index in articles and reports. Please credit BestBuilders with a link to this page (bestbuilders.co.uk/costs/heat-pump-installation-cost-index-2026).

The full regional dataset, charts and attributable commentary are available on request under a CC BY 4.0 licence โ€” use the quote form below to get in touch and we will pass your request to our press team.

Get My 3 Free Quotes
Compare vetted local specialists ยท Takes 60 seconds ยท No obligation

Heat Pump Installation cost questions

London is the most expensive UK region in 2026 for heat pump installation, with a standard air-source heat pump (installed) starting at around ยฃ12,000. The South East is second. The cheapest regions start from about ยฃ7,500: Scotland (Highlands & North).
A standard air-source heat pump (installed) starts at around ยฃ12,000 in London versus ยฃ7,500 in the cheapest UK regions in 2026 โ€” about 60% or ยฃ4,500 more. The gap is driven mainly by higher London labour rates, demand and access costs.
Labour rates are the biggest driver โ€” installers in London and the South East charge 25โ€“40% more per day than in Wales, the North East and Merseyside. Access, demand and property type add smaller premiums on top. Materials and equipment are more consistent nationally.
No. These are typical 2026 starting prices for a standard job, useful for budgeting. Your actual cost depends on size, specification, access and your specific installer. The best way to get a real figure is to compare three quotes from vetted local specialists, which is free through BestBuilders.
We refresh the index against current quote data each quarter. This edition reflects mid-2026 pricing.

How we built this index

Figures are BestBuilders 2026 "starting from" prices for a standard air-source heat pump (installed), averaged by region across our quote dataset covering 519 UK towns grouped into 14 regions. Prices are rounded and are intended for budgeting, not as quotes. The regional pattern โ€” London and the South East highest, Wales, the North East and Merseyside lowest โ€” is consistent with independent benchmarks including RICS BCIS building-cost data and FMB (Federation of Master Builders) member surveys.

Last reviewed 2026 ยท Next scheduled review Q4 2026 ยท Published by BestBuilders, a UK home-improvement quote service. Editorial standards: figures are reviewed quarterly against live quote data and cross-checked against RICS BCIS and FMB benchmarks.

Explore the detailed cost guide: heat pump installation cost guide. Or see the UK Home Improvement Cost Index 2026 for the full nine-project cross-service comparison, and the cost guide hub for every service we track.

๐Ÿ’ฌ Not sure about something? Ask a building expert
Planning permission, costs, building regs, choosing a trade โ€” free answers from our editorial team, published for other homeowners too.
Ask a free question →