Kitchen Fitting Cost Calculator

If you are buying the kitchen yourself, this is the number you actually need: what a fitter charges to install it. Priced on unit count, plus whatever else has to move.

Open the calculator →
Labour only, no units
Gas and Part P flagged
Days on site shown
100% free ยท No signup

Price the fitting labour in 30 seconds

4 steps. Unit count, what else moves, appliances and region.

How this calculator works

Fitters price on unit count and days, not on what the kitchen cost. Eight units of ยฃ200 flat-pack and eight units of ยฃ2,000 rigid take about the same time to hang โ€” though flat-pack adds assembly time if the fitter is building them.

The second question is the one that moves the number. Like-for-like is the cheapest fit there is. As soon as the sink, hob or waste moves you are paying an electrician and a plumber as well, and some of that work is notifiable.

Day rates for a sense check: a solo fitter is ยฃ180โ€“ยฃ280 a day, a two-fitter team ยฃ300โ€“ยฃ450. Multiply by the days in the estimate above and you should land in the same place.

Kitchen fitting labour cost (2026)

JobTypical 2026 costNotes
Small kitchen fit (5โ€“8 units)ยฃ1,000โ€“ยฃ1,800Roughly 2โ€“3 days
Medium kitchen fit (8โ€“12 units)ยฃ1,800โ€“ยฃ3,000Roughly 3โ€“5 days
Large / bespoke (12+ units)ยฃ3,000โ€“ยฃ5,000Roughly 5โ€“8 days
Solo fitter day rateยฃ180โ€“ยฃ280/dayVaries by region
Two-fitter team day rateยฃ300โ€“ยฃ450/dayFaster on larger jobs
Worktop fittingยฃ250โ€“ยฃ600Laminate, cut and joined on site
Flat-pack assembly+ยฃ15โ€“ยฃ35 per unitIf the fitter builds them

Figures match our labour-only fitting guide. Gas and electrical work is notifiable โ€” ask who is certifying it.

Kitchen fitting calculator FAQs

Usually on paper, and it puts you in charge of the spec. The trade-off is that you own every problem: a missing panel or a damaged door is your delay, not the fitter's, and you are paying day rates while it is sorted.

Rarely all of it. Most kitchen fitters are carpenters. Moving a gas hob needs a Gas Safe engineer and new circuits need a Part P certificate โ€” ask who is doing each and get the certificates.

Roughly ยฃ15โ€“ยฃ35 per unit if the fitter assembles them, and it can add a day to the job. Some fitters price rigid-only for that reason.

The kitchen, the worktop material, appliances, flooring, tiling unless stated, and making good the walls. Get those listed explicitly rather than assumed.

Get 3 free kitchen fitting quotes

60 seconds · No spam · No obligation