Security · Updated September 2026
Roller Shutter Repair Cost UK 2026
A routine shutter service is £90–£180, a replacement tube motor £350–£700 and spring or barrel work £200–£450. Almost every failure is one of three things: the motor, the springs, or a curtain that has come out of its guides.
Roller shutter repair and service cost — 2026
Prices are for a single shutter in normal hours, including the callout. A shopfront shutter costs more than a domestic one for the same fault because the parts are heavier.
| Job | Typical cost | How long | Notes |
|---|---|---|---|
| Service and adjust | £90–£180 | 30–60 min | Lubricate, re-tension, safety check |
| Emergency callout | £120–£250 | — | Make safe first, repair after |
| Curtain back into guides | £120–£280 | 45–90 min | The most common single fault |
| Spring or barrel work | £200–£450 | 1–3 h | Manual shutters; tension is dangerous to DIY |
| Tube motor replacement | £350–£700 | 2–3 h | Includes reprogramming the limits |
| Control box or remote | £120–£350 | 30–60 min | Often the cause when the motor is blamed |
| Replace damaged laths | £150–£600 | 1–3 h | Vehicle or forced-entry damage |
| Full curtain replacement | £600–£1,800 | Half a day | Compare against a new shutter first |
Indicative 2026 UK installed prices, compiled from published installer pricing. BestBuilders has no quote history in this category yet, so treat these as a budgeting guide and confirm against three written quotes.
What changes the cost
| Cost factor | Typical impact | Why it matters |
|---|---|---|
| Domestic or shopfront | +£80–£400 | Wider curtains mean heavier parts, two engineers and sometimes an access platform |
| Out of hours | +£60–£200 | A shutter stuck open is a security emergency and priced like one |
| Parts availability | +£0–£300 | An obsolete motor or a discontinued lath profile turns a repair into a rebuild |
| Access | +£100–£400 | Anything above ground floor may need a tower or a platform |
| Repair or replace | −£400–£1,200 | Past roughly half the price of a new shutter, replacement is usually the better buy |
| Service contract | −£40–£120 per visit | Planned visits are cheaper per call than reactive ones, and catch wear early |
Roller shutter repair cost by UK region — 2026
Modelled from regional labour rates rather than measured in this category - the hardware costs the same everywhere, the fitting does not.
| Region | Service visit | vs UK average |
|---|---|---|
| London | £120–£230 | +25–30% |
| South East | £110–£210 | +15–20% |
| South West & East | £100–£190 | +5–10% |
| Midlands | £90–£180 | Baseline |
| North of England | £90–£170 | −5% |
| Wales & Scotland | £90–£170 | −5% to baseline |
Getting it priced properly
1. Say whether it is stuck open or shut
Stuck open is a security problem and gets an emergency response. Stuck shut is an access problem. They are priced differently and both are worth stating up front.
2. Ask for the fault before the quote
Motor, springs, guides and control box fail differently and cost differently. An engineer who names the part is quoting; one who names a price is guessing.
3. Compare repair against replacement
Once a repair passes about half the cost of a new shutter, replacing it usually makes more sense - and comes with a fresh warranty.
Shutter repairs by fault
Almost every failure is the motor, the springs, or a curtain out of its guides.
Shutter repair & servicing — frequently asked questions
Most domestic repairs land between £120 and £450, plus any callout. The motor is the expensive failure at £350–£700 fitted; a curtain that's jumped its guides is usually £120–£280; new bottom-rail locks or a manual override conversion sit in between. Two things move the bill: whether the part is a stock item or has to be made to size, and whether the shutter is high enough to need access equipment. Get the fault diagnosed and the total quoted before any part is ordered, because a misdiagnosed control fault can turn a £150 visit into a needless motor.
Usually the motor limits, the control box or an obstruction in the guides — in that order of likelihood. It is worth asking the engineer to check the control side before agreeing to a motor.
No — this is the one part of a shutter that's genuinely not a DIY job. The barrel is under heavy spring tension all the time, and a torsion spring that's let go or adjusted wrongly can whip a bar round with enough force to break bones or take fingers off. The tools and the technique exist for a reason. Leave re-tensioning, spring replacement and anything involving the barrel to an engineer who does it daily, and don't be tempted by a video that makes it look simple.
Once a year for a domestic shutter and twice for a shopfront opened daily. A service is £90–£180 and mostly buys you the failures you did not have.
Up to about half the cost of a new one, yes — a single motor or spring on an otherwise sound shutter is well worth fixing. Past that, or where the motor and the curtain both need work, or the curtain is corroding, a replacement shutter usually works out cheaper over the next few years and restarts the warranty. The rough rule installers use: if the repair tops half the replacement price on an ageing shutter, put the money towards a new one instead.
Related security guides
Bells-only, monitored and smart systems priced.
When a camera or bell box needs consent.
Shutter repair & servicing — guides and detail
The detail behind the number: what changes the price, the planning position, and how to check a quote before you accept it.
Registered members: Security & Alarms
One business offering security & alarms has a public profile with BestBuilders. Each listing is a business that registered with us directly; the details shown are the ones it declared at registration, and a Companies House number appears only where one was given.
All registered trades · Recent projects · Run a security & alarms business? Add your free profile
Reviewed by the BestBuilders editorial team · Last updated: 2 September 2026 · Next scheduled review: December 2026 · See our editorial standards.